Jaw crushers work according to the principle of pressure reduction. The crushing of the crushed material takes place in the wedge-shaped shaft between the fixed and the eccentric shaft moving crushing jaw. Due to the elliptical movement process, the crushed material is crushed and transported downwards. This process will be done by using the jaw crusher wear parts will have the different types of elements such as Jaw plates, wedges, toggles, toggle seats, and cheek plates. This happens until the material is smaller than the set crushing gap. Jaw crushers are in various sizes and performance levels because the jaw crusher size will be described by the gape and width which is expressed as gape * width. The single-stage jaw crushers of the HWK series have inlet openings of up to 1600 x 2100 mm in size. The maximum capacity depends on the system quality.
In these crushers crushing takes place in a circumferentially opening and closing crushing gap between crushing shell and crushing cone by pressure crushing. The opening and closing process will take place simultaneously on the opposite sides of the crushing chamber. With the Cone crusher, the crusher shaft is pressed into the subframe. The crushing cone carrier is displaced on an eccentric drive unit. Due to the rotation of the drive unit, the gap between the crushing cone and the crushing shell opens circumferentially. The size of the grain to be produced is changed by raising or lowering the crushing coat. In contrast to pressure reduction, the principle of impact crushing is used here. The material to be crushed is picked up by a high-speed rotor, accelerated sharply, and thrown onto a fixed baffle impact swing. From there it falls back into the circle of the rotor. Thus, the crushed material is further and further broken until it can pass the gap between the rotor and impact swing. The impact crushers of the workshop series are also called secondary impact crushers, so they are mainly used from the second crushing stage. They are suitable for medium-hard to hard rocks and gravel for feed sizes up to max. 250 mm. From pre-shredded material, mineral mixtures and precious chips can be produced here. But even as primary crusher for river gravels impact crushers achieve very good results.
The jaw crusher is helpful in various stone crushing plants to reduce the size of rocks and crush its fine size. The machine is commonly used for crushing various hardness stones, which is to reduce the size of the stone. The crusher is highly adaptable and flexible; it can be used in a variety of working conditions such as crushing and grinding. The jaw crusher equipment comes in a range of different sizes and capacities to meet your requirements and helps to make your work easy.
Why Choose the Jaw Crusher for Your Business?
The jaw crushers have different types and functions. For example, our stationary jaw crusher always gets the required discharge. With a wide range of functions as standard, the jaw crusher range meets the demands of many different applications in the aggregate and mining sectors. This equipment has been tried and tested around the world to improve reliability and efficiency, which provides the clients with greater overall productivity. It has advanced design and optimized performance. Also, it has a simple maintenance and long service life. The jaw crusher has the deep and symmetrical crushing chamber; these are the most effective equipment for crushing harder stones, which is easy to adjust with a large feed port. Jaw crushers are widely used in metallurgical mines, building materials, silicates, and chemical industries. It is generally used for the course of medium crushing of hard of medium-hard ore.